By - Schuette Mfg.

Knowles Econo 6-Wheel Tandem Wagon Model W 200-6

The Model W 200-6 is ideal for use under forage boxes and other equipment.  Special steering design prevents swaying and fishtailing. Formed steel axle assemblies are rigidly reinforced and gusseted to give the best capacity for the weight. Heavy, round telescoping reach tube resists kinking or bending. Wide 72″ treadwidth is ideal for safe hauling over rough terrain. Tandem axle assemblies are furnished with solid steel pivot shafts.

The Model W 200-6 is ideal for use under forage boxes and other equipment. 

NOTE THESE FEATURES:

  • Special steering design prevents swaying and fishtailing.
  • Formed steel axle assemblies are rigidly reinforced and gusseted to give the best capacity for the weight.
  • Heavy, round telescoping reach tube resists kinking or bending.
  • Wide 72″ treadwidth is ideal for safe hauling over rough terrain.
  • Tandem axle assemblies are furnished with solid steel pivot shafts.

SPECIFICATIONS

Weight Less Tires…932 lbs.Treadwidth…72″
Capacity…24,000 lbs.Tie Rods…Solid Steel
Hubs…Heavy 6-BoltWheel Bearings…Tapered Roller
Wheels…15 x 8.00 or 15 x 10.00 DCPivot Shafts…Solid Steel
Spindles…2″ Diameter 1045 SteelTandem Axles…Boxed Steel
Reach…High StrengthFrame…Heavy Pressed Steel
Wheelbase…Adjustable, 8 to 12 FeetTandem Spindles…38″ Centers
Tongue…72″ Heavy-Duty Tubular ConstructionBushings At All Wear Points
Stakes…38″ – 42″ SpacingDust Seals On Spindles & Hubs

EXTRA EQUIPMENT

TiresBall Hitch
77″ Telescoping TongueLights
Extra Long ReachBrakes
Safety ChainsPintle Eye Hitch
By - Schuette Mfg.

Knowles Coulter Chisel Plow

This high quality chisel plow is made of solid plate and channel steel. Heavy draw bar is adjustable to various heights. Individual spring mounting of coulters prevents damage when striking rocks and other solid objects. 20″ diameter coulter blades cut up stalks and stubble and improve the work done by the 4″ twisted shovels. 31″ spring cushioned shanks make deep penetration possible. Coulters can be raised above ground when not needed. Dual hydraulic lift system independently sets desired coulter and shank depths. Coulter hubs rotate on tapered roller bearings with triple lip seals.

Models 579-5, 579-7 and 579-9

Model Cutting
Width
Shanks Coulter
Blades
Weight
579-56’6″59
579-79’1″713
579-911′ 8″917

Models 579-5, 579-7 and 579-9

Model Cutting
Width
Shanks Coulter
Blades
Weight
579-56’6″59
579-79’1″713
579-911′ 8″917

Check These Specifications:

Frame:5/8 x 8″ plate and 8″ x 19# channel.
Hitch:5″ channel and 4″ sq. x 1/4″ tubular A-frame construction.
Jack Stand:Adjustable heavy-duty type.
Shanks:2″ x 1-1/4″ edge bent and heat treated.  31″ high clearance type.
Chisels:4″ twisted shovels on 15″ spacing.
Coulters:20″ diameter solid, individually spring-mounted.
Springs: Tempered steel.
Wheels: 579-5 and 579-7: 15 x 8.00 with 11L x 15 8-ply tires.
579-9: 15 x 10 with 12.5L x 15 8-ply tires.
Renewable bushings and grease fittings extend the life of the machine.
**Cutting width of each model can be increased 2-1/2 feet by adding a pair of extensions.
**Bolt-together construction allows for economical shipping when knocked down.
By - Schuette Mfg.

Knowles Series H Spring Tooth Harrows 3-Point Hitch Pull Type

This is an all new high quality, ruggedly designed harrow that will give many years of satisfactory service.  It can be converted from a three-point hydraulic lift type to a trailing or a pull type machine by removing a tee handle pin.  With this arrangement, two different requirements for spring tooth harrows can be met with a single model.

MODELCUTTING WIDTHTEETHSECTIONSWEIGHT
H 3013 ft.9One – 3 ft.255
H 6016 ft.18Two – 3 ft.430
H 9019 ft.27Three – 3 ft.625
H 120112 ft.36Three – 4 ft.740
H 160116 ft.48Four – 4 ft.994

STANDARD EQUIPMENT

Rectangular Tooth Bars – 23″ Spacing
Adjustable Tooth Clamps
Replaceable Runner Shoes
Depth Control Levers
Adjustable Hitch
Heat Treated Teeth

STANDARD FEATURES

Rugged draw bar and lifting frame do not restrict flexibility of harrow.
Yoke pivots on 1″ diameter bolts.
Teeth are mounted on heavy 1″ x 2″ steel tubing.
Teeth are punched for standard shovels.
By - Schuette Mfg.

Knowles Series SW 720 Wheel Mounted Spring Tooth Harrow

Sections raise hydraulically for easy trash removal and backing up. Sections are easily moved to 90 degrees for transport. Heavy duty tubular frame is reinforced at all stress points. Heavy wear shoes are provided for longer life. Heat treated spring teeth resist wear and breakage. Size of tooth – 1-3/4″ x 5/16″ x 39″. Teeth require 1/2″ mounting bolts. 3/8″ holes provided in teeth for replacement points on 2″ centers. Sections are joined together with 1″ diameter bolts. Jackstand for easier hitching is standard equipment. 15″ wheels with large flotation type tires are standard. A rugged adjustable hitch is provided to fit tractor draw bar. 23″ tooth bar spacing.

The new KNOWLES wheel-mounted harrow is designed for fast and efficient seedbed preparation.

A heavy structural frame and hydraulic lift give fast, convenient transport and easy field operation.  Available in three standard sizes.

MODELSIZETRANSPORT WIDTHSECTIONSTEETHWEIGHT
7201616′12’6″Four – 4 ft.482189#
7202020′12’6″Two – 4 ft.Four – 3 ft.602550#
7202525′12’6″Six – 4 ft.722762#
By - Schuette Mfg.

Knowles 30′, 34′ and 38′ Wheel Mounted Spring Tooth Harrows

2″ x 2″ Tooth Cross Bars. Size of Tooth-1-3/4″ x 5/16″ x 39″. Heavy Duty Tubular Tongue and Frame. Single Wing Support Tire on Each Wing. Variable Length Tongue insert for Each Width. Dual 12.5L x 15 8-Ply Tires for Added Flotation. Wing Sections are Easily Moved to 90 degrees for Transport. Depth Control Levers. 23″ Tooth Bar Spacing. Center Mounted Jack Stand. Heavy Duty Replaceable Front and Rear Wear Shoes. Heat Treated Teeth with Holes for Replacement Points.

SPECIFICATIONS

MODELSIZETRANSPORT WIDTHSECTIONSTEETHWEIGHT
7203030′16’8″Seven – 4 ft.884200#
7203434′16’8″Four – 3 ft.
Five – 4 ft.
1004525#
7203838′16’8″Nine – 4 ft.1124760#

EXTRA EQUIPMENT:

Lifting Controlled with Two Hydraulic Cylinders for Easy Trash Removal and Transport (Hydraulic Cylinders Not Included-Hydraulic Cylinder Kit Available Upon Request)
By - Schuette Mfg.

Cattle Trailer

All steel construction, 2″ treaded wood floor,2-5/16″ coupler 

Available in:
Single axle 6′ x 8′
(1 torsion bar 6,000 lb. electric brake axle)

Tandem axle 6′ x 10′
(2 torsion bar 3,500 lb. axles, electric brakes on 1 axle)