By - Schuette Mfg.

Knowles Model K 808

The new model K808 is designed for heavy forage and grain box use.  It incorporates the latest short turning automotive front axle.  The main framework is constructed of structural steel and heavy wall tubing.  The latest in wide base 15″ or 16″ wheels are supplied to accommodate flotation tires.

A new pressed type steel stake with an adjustable setting is furnished as standard equipment.  The heavy duty axle assemblies are made of 6″ structural I-beam heavily braced and gusseted.  Tie rods are located to the rear of the front axle.   A Tongue long enough to accommodate large size forage boxes is available.

All points of wear are equipped with renewable bronze bushings and the heavy duty 6-bolt hubs rotate on the latest in tapered roller bearings.

GENERAL SPECIFICATIONS

Capacity – 19,000 lbs.Weight less tires – 684 lbs.
Hubs – Heavy Duty 6-boltSpecial short turning radius
Axles – 6″ I-BeamTreadwidth – 72″
Tie Rods – 7/8″ C.F.Bushings on all points of wear
Bearings – tapered rollerReach – 2-7/8″ Diameter high strength
Wheels – 15 x 8.00, 15 x 10.00 or 16 x 8.00Spindles – reinforced 2″ Diameter 1045 steel
Tongue – fixed lengthWheelbase – adjustable from 8′ to 14′
Stakes – adjustable 38″ to 42″Dust seals on hubs

EXTRA EQUIPMENT

Flexible BolstersSafety Chains
BrakesSprings
EASY HITCH TongueEASY LIFT Tongue Support
Flotation TiresLights
Extra Long Reach
By - Schuette Mfg.

Knowles K 606 Farm Wagons

Axle assemblies are of formed and welded construction using the most improved welding methods.  The reach is made of heavy wall tubing and is adjustable in length.   Straight line pull through the reach is an exclusive feature of this model.   Tie rods are located to the rear of the front axle.  All moving parts are equipped with renewable bushings.  Tapered high speed bearings are used in the wheel hubs.

SPECIFICATIONS

Capacity-12,000 lbs.Weight with tires – 654 lbs.
Axle assemblies-formed high-tensile steelShort turning radius
Bolster length adjustable from 7′ to 12′Tongue – formed rectangular steel
Treadwidth- 72″Color – red synthetic enamel
Automotive type steeringTapered high speed wheel bearings
1-3/4″ steel spindlesFormed steel stakes – adjustable from 38″ – 42″
All points of wear equipped with bushings and Zerk fittings6-Bolt demountable wheels-15×6.00 or15x8.00 DC
Reach – tubular, adjustable

EXTRA EQUIPMENT

TiresSafety Chains
EASY HITCH TongueLights
Extra Long Reach
By - Schuette Mfg.

Knowles Big Boy Farm Wagons

Axle assemblies are of formed and welded construction using the most advanced welding methods.  The reach is made of heavy wall tubing and is adjustable in length.   Tie rods are located to the rear of the front axle.  All moving parts are equipped with renewable bushings.  Tapered high speed bearings are used in the wheel hubs.  The overall unit embodies first quality material and workmanship, and is priced most competitively.

DESIGNED FOR RUGGED FARM SERVICE AND MADE ENTIRELY OUT OF

  HIGH- TENSILE STEEL

SPECIFICATIONS

Capacity 10,000 lbs.Tongue formed rectangular steel
Axle assemblies of formed high-tensile steelShort turning radius
Reach-tubularWeight with tires – 523 lbs.
Tread width 70″ or 62″Formed steel stakes:
Automotive type steeringW3000 – 38″ spacing
1-5/8″ steel spindlesW3000X – 38″- 42″ spacing
Tapered high speed wheel bearingsAll points of wear equipped with bushings and Zerk fittings
5-Bolt 14×5.00 or 15×5.00 DC wheelsBolster length adjustable from 7′ to 12′

EXTRA EQUIPMENT:

TiresExtra Long Reach
Telescoping TongueSafety Chains
Lights
By - Schuette Mfg.

Knowles Econo Wagons, Models W 175 and W 200

Axle assemblies are of formed and welded steel rigidly reinforced and gusseted. Heavy, round telescoping reach tube resists bending or kinking. Wide 72″ treadwidth is ideal for safe hauling over rough terrain. 72″ heavy-duty tubular tongue is standard equipment.

SPECIFICATIONS

Model W 175Model W 200
Weight Less Tires…560 lbs.Weight Less Tires…645 lbs.
Capacity…16,000 lbs.Capacity…20,000 lbs.
Hubs…Heavy 6-BoltHubs…Heavy 6-Bolt
Wheels…15 x 6.00 or 15 x 8.00 DCWheels…15 x 8.00 or 15 x 10.00 DC
Spindles…1-3/4″ Diameter 1045 SteelSpindles…2″ Diameter 1045 Steel
Reach…High StrengthReach…High Strength
Wheelbase…Adjustable, 8 to 12 FeetWheelbase…Adjustable, 8 to 12 Feet
Tongue…72″ Heavy-Duty Tubular ConstructionTongue…72″Heavy-Duty Tubular Construction
Stakes…38″ – 42″ SpacingStakes…38″ – 42″ Spacing
Treadwidth…72″Treadwidth…72″
Tie Rods…Solid SteelTie Rods…Solid Steel
Wheel Bearings…Tapered RollerWheel Bearings…Tapered Roller
Bushings At All Wear PointsDust Seals On Spindles & Hubs
Dust Seals On Spindles & HubsBushings At All Wear Points

EXTRA EQUIPMENT

TiresPintle Eye Hitch
77″ Telescoping TongueBall Hitch
Extra Long ReachBrakes
Safety ChainsLights
By - Schuette Mfg.

Knowles Combine Header Transport Trailer: Model CH-70

This new and improved transport trailer is designed to move or store all popular combine heads.

Various adjustments can be made to accommodate the user’s equipment.

The heavy tubular frame is mounted on the always reliable KNOWLES running gear.

Specifications

Overall length 29′Above ground height :
Overall width 81″    Upper bar 26-1/2″ – 42″
Tongue telescope 17-1/2″    Lower bar at axle 22-1/2″
Tongue – fixed length 138″, 144″ and 150″    Lower bar with offset down 18-1/2″
Length of upper and lower rest bars19’9″    Lower bar with offset up 26-1/2″
Distance between bar rests:Capacity 7000 lbs.
29″- 54″ adjustable to any incrementWeight 1130 lbs.
Tires 20.5 x 8-10Two adjustable header locating pads
By - Schuette Mfg.

Knowles Heavy Duty Tandem Farm Wagon

The T760A is designed for feed and forage box equipment, and is also ideal for sprayer and fertilizer tanks. A unique axle suspension makes the wagon flexible for rough terrain. The wheels will not lose their alignment, even when heavily loaded and operated in muddy fields. The all steel welded frame is made of heavy 6″ channel, rigidly cross braced and reinforced at all points. Spindles are welded to a heavy walking beam, which is equipped with an inner angle brace. The oscillating shaft is 1-¾” in diameter and is bearing mounted. Full 2″ diameter spindles and heavy duty 6-bolt hubs are used on the T760A. 15 x 10.00 or 16 x 8.00 drop center wheels are standard equipment.

GENERAL SPECIFICATIONS

Capacity – 20,000 lbs.Spindles – 2″ Alloy Steel
Length – 17 feetHitch – Clevis Type
Treadwidth – 76 “Jack – Hinged Type
Frame Width – 42 “Wheels – 15″ or 16″ DC
Bearings – High Speed TaperedWeight with Tires – 1221 lbs.
Hubs – Heavy 6-Bolt

EXTRA EQUIPMENT

BrakesTires – 10.00 x 15 8-ply
12.5L x 15 8-ply
12.5L x 16 8-ply
20″ Wheels
Hitch – Ball Type or Pintle Eye
By - Schuette Mfg.

Knowles Model K 970M

The K970M is made for heavy-duty agricultural use where flotation is of utmost importance.  It will move heavy loads from soft fields with a minimum of draft, and can be towed and backed easier than a conventional four wheel type gear. A new and improved tandem axle assembly is now standard.  This new design feature permits operation in heavy mud without clogging.  Pivot point is 1″ off center for reduced stress on tandem axles when turning. The unit is constructed of heavy welded structural steel with a high carbon tubular steel reach.  Spindles are made of 1045 cold finished steel and are pressed in- no welding on tandem spindles.  The hubs rotate on the latest type tapered bearings.  All points of wear are equipped with renewable bushings.

GENERAL SPECIFICATIONS

Capacity………………..24,000 lbs.Turning Radius……….Short
Wheels………15 x 10.00, 15 x 8.00 or 16 x 8.00Hubs……………………..Heavy 6-Bolt
Reach……………………2-7/8″ Diameter high strengthTreadwidth…………….80″
Weight with Tires……1405 lbs.Tongue………………….Fixed Length
Stakes……………………Heavy pressed steelTandem Spindles……..38″ centers
Bushings………………..At all points of wearFrame…………………….Structural Steel
Tie Rods………………..Solid SteelTandem Axle………….Wide Clearance
Wheelbase……………..Adjustable from 8′ to14′Spindles ………………..Reinforced 2″ Diameter 1045 Steel Pressed fit in Tandem axle

EXTRA EQUIPMENT

TiresFlexible Bolsters
EASY HITCH TongueEASY LIFT Tongue Support
Brakes(Electric or Hydraulic)Lights
SpringsSafety Chains & Extra Long Reach 
By - Schuette Mfg.

Knowles Super Tandem 6-Wheel Wagon Model TB1800

This model is designed for the large farming operation.  A flexible rear axle assembly equally divides the load on all tires.  This feature gives improved flotation with maximum load.  The TB 1800 is made of heavy structural steel rigidly reinforced at all stress points.   The front axle is equipped with a heavy-duty rocking bolster.  Steering mechanism is truck-type with heavy steel trunnions, cold finished king pins, and thrust bearings.  All points of wear have renewable bushings, and the hubs rotate on oversized tapered bearings.

GENERAL SPECIFICATIONS

**Capacity………………………………………….36,000 lbs.Bolster Pins……….1-5/8″ Diameter
Treadwidth…………………………………………………………80″King Pins……………..1-3/4″ Diameter
Spindles……………………………………………..2-3/4″ DiameterBushings…………….At All Wear Points
Hubs………………………………..8-Bolt with Tapered BearingsTie Rods……….1-1/8″ Solid Steel
Wheel Bearings…Tapered Roller – 2.1654″ and 1.6250″ IDStakes……….Adjustable 38″ – 42″
Wheels…….16.1 x 11, 16.1 x 14, 16.5 x 8.25, or 20 x 8 DC*Wheelbase……Adjustable 8′ – 16′
Tongue…………Rectangular EXTEND-O-MATIC with EASY LIFT Tongue SupportTandem Axles………………Walking Beam Type
Reach…………………………………………..4″ DiameterFrame……………….Structural Steel
Bolster……………………………………….Flexible FrontWeight with Tires…………….2543 lbs.

** When Equipped with Rated Tires

  * Special Reach Lengths Available

By - Schuette Mfg.

Knowles Super Tandem 6-Wheel Wagon Model TB450-1

This model is designed for large farming operations and construction use.  A flexible rear axle assembly equally divides the load on all tires.  This feature gives improved flotation with maximum load.  The TB450-1 is made of heavy structural steel rigidly reinforced at all stress points.   The front axle is equipped with a heavy-duty rocking bolster.  The truck-type steering mechanism has heavy steel trunnions, cold finished king pins, and thrust bearings.  All points of wear have renewable bushings, and the hubs rotate on oversized tapered bearings.

GENERAL SPECIFICATIONS

**Capacity……………………………………………..45,000 lbs.King Pins…………………….1-3/4″ Diameter
Treadwidth…………………………………………………………87″Bushings………………….At All Wear Points
Spindles…………………………………………………3″ DiameterTie Rods…………………..1-1/4″ Solid Steel
Hubs……………………………………………Heavy Duty 8-BoltStakes………………….Adjustable 42″ to 44″
Wheel Bearings……Tapered Roller 2.250″ and 1.625″ I.D.Wheelbase…………….Adjustable 10′ to 15′
Wheels……………………………………..16.1 x 16 DC 8-BoltPivot Shaft………….2-3/4″ CR Round Steel
Reach……………………………………………………4″ DiameterTandem Axles…………Walking Beam Type
Bolster……………………………………………….Flexible FrontFrame………………………8″ Boxed Channel
Bolster Pins…………………..1-5/8″ Diameter Heat TreatedRear Tow Hitch………Standard Equipment
Tongue……………82″ Tubular Steel Fixed Length or Rectangular Extendible with EASY LIFTWeight less Tires…………………..3,012 lbs.

**When Equipped with Properly Rated Tires

EXTRA EQUIPMENT

4-Wheel Inertia-Hydraulic BrakesPintle Eye Hitch
Tires 19L x 16.1 or 21.5 x 16.1Bolster Blocks
16.1 x 18 DC or 22.5 x 13 Truck WheelsExtra Long Reach
Safety ChainsLights
By - Schuette Mfg.

Knowles Model T1168M 6-Wheel Tandem

Study the new and improved T1168M tandem farm wagon.  The main frame is constructed of heavy structural steel, rigidly braced and gusseted at all stress points.   Boxed rectangular walking beams assure straight trailing and maximum strength.   Solid steel pivot shafts oscillate on bronze bushings.  The T1168M is an ideal running gear for use under forage boxes and other heavy duty equipment.

GENERAL SPECIFICATIONS

Capacity – 33,000 lbs.Hinge Bolt – 1-1/8″ Diameter
Treadwidth – 80″Bushings – At All Wear Points
Wheels – 15 x 10, 16 x 10, 16.1 x 11, or 16.5 x 8.25 DC 8-BoltPivot Shafts – 1-3/4″ CR Round Steel
Spindles – 2-1/4″ DiameterRear Tow Hitch – Standard Equipment
Hub Bearings – Tapered Roller – 1.7807″ and 1.2495″ I.D.Turning Radius – 55 degrees
Bolster Stakes – 42″Wheelbase – Adjustable from 7′ to 13′
Tandem – Axles – Flexible Type – 44″ CentersTongue – Rectangular EASY HITCH
Reach Tube – 3-1/2″ ODTie Rods – 1″ Diameter
Steering – Truck TypeBolster – Flexible Front
King Pins – 1-3/4″ Diameter Heat TreatedWeight with Tires – 1989 lbs.
Hubs – Heavy Duty 8-Bolt

EXTRA EQUIPMENT

2 or 4 Wheel Brakes – Inertia-HydraulicEASY LIFT Tongue Support
EASY RIDE Spring Stake AssembliesSafety Chains, Bolster Blocks
16.1 x 14″ and 20″ Drop Center WheelsTires, Lights
Extra Long Reach